Is your Windows update being hampered by the error code 0x8024a105? Don’t worry, we’ve written an article to assist you fix this annoying issue once and for all. Many issues occur throughout the Windows updating procedure.
The Windows update error code 0x8024a105 is one of these. In order to permanently fix the mistake, you must first understand what caused it. The following are some of the most common causes of the ‘Windows update error code 0x8024a105’:
- System files that have been incorrectly set Installation that is not complete.
- un:installation that is not complete.
- Errors in application or hardware elimination.
- Virus infection, improper shutdown, and so on.
Read Also:
How to Fix Error Code 0x8024a105 in Windows 10 Update
Here are five fast fixes for the ‘Windows update error code 0x8024a105’ that you should try.
1. Switching the Internet Connection
You could also try changing your internet provider. Consider using a wireless network or another type of internet connection. Try the Windows update again once you’ve changed your internet connection.
2. Restart Your Computer
It may not appear to be a particularly effective trick, but it has worked in the past. Try resetting your computer and reinstalling the update. It might also assist you in overcoming the error.
3. Utilize the Troubleshooter
Troubleshooting can assist you in resolving update issues. So go ahead and give it a shot.
To run the troubleshooter, follow the steps below:
Step 1 – Launch troubleshoot by looking for it in the’start’ menu.
Step 2 – A troubleshooting window will appear. Select ‘windows update’ from the list of alternatives.
Step 3 – Finally, select ‘run troubleshooters’ and wait for the scan to finish.
Step 4 – When difficulties with the update emerge, simply follow the on-screen directions to resolve the issue.
Restart your computer and update your Windows. If the ‘Windows update error code 0x8024a105’ problem reappears, proceed to the next step.
4. Clear and Reset the Software Distribution Folder
A crucial Windows Update Component is the software distribution folder. The ‘Windows update error code 0x8024a105’ can be caused by a problem with the programme distribution folder. As a result, you must reset it.
To clear and reset the software distribution folder, follow the steps below:
Step 1 – To begin, press and hold the ‘Windows’ and ‘X’ keys at the same time. Then, from the list of options in the bottom left corner of your screen, select ‘command prompt (admin)’ to open the command prompt (admin).
Step 2 – In the command prompt window, type the following commands one by one. (Always press enter after each command.)
halt bits on the internet
wuauserv wuauserv wuauserv wuauserv
appidsvc appidsvc appidsvc appidsv
stop cryptsvc on the network
Step 3 – Go to the appropriate folder in the next step: C:\Windows\SoftwareDistribution\Download.
Step 4 – The software distribution folder will appear on the screen. After that, remove all of the content.
Step 5 – Return to the Command Prompt and type the commands listed below one by one in the command prompt window. (Always press enter after each command.)
start bits on the internet
wuauserv wuauserv wuauserv wuauserv
start appidsvc.net
start cryptsvc from the command line
Step 6 – Last but not least, restart your computer.
Try upgrading the system once again. If the problem persists, try the following method.
5. Reset the Catroot2 Folder
To clean and reset the catroot2 folder, follow the steps below:
Step 1 – To begin, press and hold the ‘Windows’ and ‘X’ keys at the same time. Then, from the list of options in the bottom left corner of your screen, select ‘command prompt (admin)’ to open the command prompt (admin).
Step 2 – In the command prompt window, type the following commands one by one. (Always press enter after each command.)
stop cryptsvc on the network
md% systemroot% system32catroot2.old md% systemroot% system32catroot2.old md% systemroot% system32catroot2.old
xcopy percent systemroot percent system32catroot2.old /s xcopy percent systemroot percent system32catroot2.old /s xcopy percent systemroot percent system32catroot2.old /s xcopy percent systemroot percent system32catroot2.old /s xcopy percent system
start cryptsvc from the command line
Step 3 – Now go to the Catroot2 folder and delete all of the files inside.
Step 4 – Last but not least, restart your computer.
Try upgrading the system once again. If the issue persists, move on to the next step.
6. Use the DISM Tool
If the ‘Windows 10 update error code 0x8024a105’ is caused by corrupted files, the most obvious option is to repair them. As a result, you’ll need to use the built-in DISM utility to resolve the issue.
To use the built-in DISM tool, follow the steps below:
Step 1 – To begin, press and hold the ‘Windows’ and ‘X’ keys at the same time. Then, from the list of options in the bottom left corner of your screen, select ‘command prompt (admin)’ to open the command prompt (admin).
Step 2 – Type the command below and hit enter.
DISM /Online /Cleanup:Image /CheckHealth DISM /Online /Cleanup:Image /CheckHealth
Step 3 – The DISM utility will take care of the rest, scanning for corrupted files and repairing them as needed.
Step 4 – Last but not least, restart your computer.
Try upgrading the system once again. If the ‘Windows 10 update error code 0x8024a105’ problem persists, proceed to the next step.
7. Customize Windows Update Settings
To change Windows update settings, follow the steps below:
Step 1 – To begin, open the settings menu.
Step 2 – Select ‘Update and Security’ from the drop-down menu.
Step 3 – Finally, choose the ‘Advanced Option.’ Check the box next to the option “Give me updates for other Microsoft products when I upgrade Windows.”
Step 4 – Select ‘Delivery Optimization’ from the drop-down menu. Then, click the box next to ‘Allow downloads from other PCs.’
Please try upgrading once more. If the problem persists, try the following method.
8. Do a Fresh Boot
To do a clean boot, follow the steps below:
Step 1 – To enter the run command dialogue box, press the ‘Windows’ key and ‘R’ at the same time.
Step 2 – In the run command dialogue box, type’msconfig’ and click enter.
Step 3 – The utility window for ‘System Configuration’ will appear. Then, under the ‘Services’ Tab, click.
Step 4 – Select the ‘Hide all Microsoft Services’ option and check the box.
Step 5 – Finally, select ‘disable all’ and press OK.
Try reinstalling Windows from scratch. If the problem persists, try the following method.
9. Reset the Windows Update Tool Agent
To reset the Windows update tool agent, follow the steps below:
Step 1 – First, go to https://gallery.technet.microsoft.com/scriptcenter/Reset:WindowsUpdateAgent and download the “Reset Windows Update Agent” script.
Windows:Update:Agent:d824badc
Step 2 – Right-click on the ‘Reset Windows Update Agent’ and choose ‘Run as Administrator’ from the context menu.
Step 3 – A notice will display asking if you wish to continue the process. Yes is selected, and enter is pressed.
Step 4 – The’reset windows update agent’ will now check for any difficulties that may have arisen.
Restart your computer and run the Windows update. If the problem persists, try the following method.
10. Update Drivers
It’s possible that the error is caused by out-of-date drivers. As a result, make sure the drivers are up to date.
To update your drivers, follow the steps below:
Step 1: To begin, press and hold the ‘Windows’ and ‘X’ keys at the same time. Now, from the list of options in the bottom left corner, select device management.
Step 2 – Next, select the out-of-date driver. Select ‘upgrade the driver software’ from the context menu by right-clicking on it.
Step 3 – An updated driver will be installed if one is required.
Reinstall the Windows update. If the problem persists, try the following method.
Read Also:
Conclusion
Hopefully, one of the solutions listed above was successful in resolving the ‘Windows update error code 0x8024a105’. Finally, you’ll be able to upgrade your Windows to a newer version and take advantage of a variety of new features as well as a speedier user experience.