How To
How To

The SSD MEMORY MANAGEMENT ERROR in Windows10 is somewhat common among users which can be very annoying as well as difficult to fix without the correct knowledge.

This error is usually accompanied by a blue screen which is commonly known as the BSOD. This Blue Screen of Death or BSOD is an indication of some fatal error in the system.

How To
How To

Before jumping into the matter right away, let’s get familiarized with a common technical term; known as the SSD. The SSD or Solid State Drive is a storage device, often used instead of HDD because of its superior speed. The SSD can store data even if it is not connected to a source of power.

Use of SSD 

1. Manages heavy and random workloads.

2. Reads data directly from a remote cell location of the SSD.

3. Makes reading info from transaction-heavy databases very fast.

4. SSDs provide faster storage, boot-up time and better performance than fixed HDDs.

The Memory Management Error Occurs The Following Situations 

1. When memory management process fails, unauthorized applications use up the entire RAM and this crashes the system.

2. Sometimes outdated software as well as drivers may lead the system to crash and the outcome is the annoying BSOD error.

3. Also, corrupt files may lead to hardware failures such as the RAM of the system. This will cause this MEMORY MANAGEMENT ERROR undoubtedly.

How to Solve SSD Memory Management Error Message in Windows 10

Here we have listed the solutions to fix SSD management error message in Windows 10. So let’s have a look at them।

Solution 1 –Run SFC Scanner to Fix the SSD Memory Management Error

The SFC scanner is a command prompt console line that is used to scan and check the system’s vital as well as protected files for corruption or malfunction.

Upon detection of any corrupted file, the scanner will automatically replace those files with a backed-up copy that is stored as cache in the operating system folder of the PC.

The way to execute this scan method is as follows –

Step 1: Go to the Start Menu and search for “cmd”.

Step 2: Run it on Administrator mode.

Step 3: The Command Prompt console pops-up instantly.

Step 4: Type in “sfc/scannow” and press ENTER.

Step 5: This will run the SFC scanner automatically now.

After pressing enter, the Scanner starts to run in the system background checking for errors and verifying the system files. The process takes some time to complete and upon completion will fix and repair corrupted files in the system.

Solution 2 – Run Windows Memory Diagnostic Tool

Windows operating system provides a Memory (RAM) Diagnostic Tool that will scan the system’s physical memory provided by the RAM and analyze how much it has been used by the applications.

This Tool identifies inconsistent errors that may be caused by these applications and then fixes them. The system needs to re-boot for this Diagnostic Tool to start working.

Following are the steps to initiate the tool –

Step 1: Press the Windows Key + R to pop-up the Run

Step 2: Type in “exe” and press Enter.

Step 3: Choose the first option to “Restart now and check for problems”.

Step 4: Let the computer complete the re-boot process and the diagnostic tool will run automatically upon startup.

After the Diagnostic Tool completes scanning, it will present a report if anything is wrong with the system’s physical memory.

Note: Save documents and running processes because all progress will be lost upon initiating this tool.

Solution 3 — Revert Your PC Settings to Default if You Overclocked it

The term ‘Over clocking’ is used when a user increases the clock rate of a system’s CPU to improve overall speed of the system and also its performance. Every PC is loaded with a processor which has chips as its component.

These chips are sped up by over clocking the processor which in turn provides more power to the system. But over-clocking has side effects. Some of these are discussed below –

  • Over-clocking reduces the lifespan of the particular component which is being over-clocked.
  • Over-clocking heats up the system and this could harm the whole computer. This will cause instability and applications will start to crash upon running.

Ways to revert over-clocking are as follows

Step 1: Go to CMOS or BIOS settings of the system by pressing F2 while rebooting and reverse the voltage of the motherboard back to normal.

Step 2: This can also be done by choosing the ‘Restore Fail Safe Defaults’ option.

Systems should not be over-clocked if not needed to be; otherwise serious damage could be caused by the heating of the core processor of the system.

Solutions 4 — Run a Full System Scan

Running a full system scan will guarantee the safety and integrity of the system’s files from malwares and viruses that might interrupt their normal processing.Running a full system scan is done in many ways including using Anti-virus software or the system’s Windows Defender itself.

Using an Anti-Virus

Step 1: Open the anti-virus from the system tray.

Step 2: Navigate to the Scan option.

Step 3: Click on ‘Full System Scan’ option.

The general process is usually very similar for all anti-viruses and the scan is conducted in the background.

Using the Windows Defender

Step 1: Go to Settings from the start menu and click Update & Security, and then click the Windows Defender option on the left side panel.

Step 2: Click on “Open Windows Defender Security Center”.

Step 3: Now, click on the “Virus and Threat Protection” button on the left side.

Step 4: Click the ‘Quick Scan’ button. Windows Defender will scan the computer and report any discrepancies should they occur.

Step 5: Click ‘Advanced Scan’ to between a full scan, a custom scan, and an offline scan.

Scanning via the Windows Defender is probably the best option in-case the computer has not been equipped with antivirus software.

Solution 5 — Repair your Registry

The Windows Operating System contains a registry which is basically a database that stores information for low-level settings used by various applications on the system.

Sometimes, the database files might get corrupted and disrupt the normal functioning of the system. This can be fixed by repairing the registry files.

There are multiple ways to fix or repair the registry. The most efficient are as follows:

Using a Free Registry Repair Tool

Step 1: Click on the link given below to download the software.

Step 2: After installation, follow the instructions in-app to complete the restoration process.

Note: Requires active internet connection to download the software.

Using the Automatic Repair 

Step 1: Open Settings and go to “Update & Security”.

Step 2: On the ‘Recovery’ tab, click on Advanced Startup > Restart Now.

Step 3: Upon reaching the ‘Choose an option’ screen, click on “Troubleshoot”.

Step 4: Then at the ‘Advanced Options’ screen, select “Automated Repair”.

Step 5: Choose the login account when prompted to and continue.

Step 6: Wait for the process to be completed. (The system might be rebooted several times).

Following these steps should fix the registry. Running the SFC Scanner from solution 1 will also give the same results.

Solution 6 — Update the OS TO Fix SSD Memory Management Error

Sometimes old OS versions conflict with the hardware configurations of the system, which might lead to a various problems. One of the major problems is the SSD memory error that might be caused due to out-dated OS version. To fix this, update the OS version of the system.

Automatic Update

Step 1: Click on the Start menu and search for “Updates”.

Step 2: Select and click on “Check for updates” under System Settings and then on the screen that pops up after.

Step 3: The computer will automatically search for updates from the internet and notify the user if any updates are available.

Step 4: Install the updates if available and restart the system.

Direct Method

Step 1: Click on the link given below –

Step 2: Scroll down and click on “Check for Windows updates”.

Step 3: Click on “OPEN” via the pop-up.

Step 4: Follow the second steps onward from the above “AUTOMATIC UPDATE” panel.

NOTE: Requires active internet connection to check and download the updates.

Solution 7 — Clean You Temporary Files and Folders

The local drive contains and stores files for the applications that are being run on the system. Sometimes, these drives create temporary files that are useless and are created while only running the application.

These files and folders eat up the memory of the system and makes the computer slow. This might also lead to memory errors. To fix this problem, clean up the drivers by following the given steps.

Using CMD 

Step 1: Go to the Start menu and search for “cmd”.

Step 2: Run it as an administrator.

Step 3: Type in “cleanmgr” and press enter.

Step 4: Select the drive to be cleaned.

Step 5: Check the boxes and then click on “Clean up system files”.

Using Disk 

Step 1: Go to the Start menu and search for “Disk Cleanup”.

Step 2: Open it by clicking on the app.

Step 3: Select the drive to be cleaned.

Step 4: Check the boxes and then click on “Clean up system files”.

Doing this will free up memory on the system and the error will be less likely to occur.

Solution 8 — Check yous Disk for Errors

Checking the disk for errors is important to prevent further damage to the system. There are many of ways of doing this. Follow the steps given below for checking the disk errors.

Using CMD

Step 1: Go to the Start menu and search for “cmd”.

Step 2: Run it as an administrator.

Step 3: Type in “chkdsk C: /f” and press enter.

/f is used to fix any errors that are found while checking the disk. There are multiple commands such as /r to check for bad sectors and fix readable physical data.

Using My Computer

Step 1: Open ‘This PC/ My computer’ by double-clicking.

Step 2: Select the drive to be check and right click on it.

Step 3: Select Properties.

Step 4: Go to the “Tools” tab.

Step 5: Select ‘Check’ at the Error Checking

Step 6: Click on “Scan Drive” to begin the scanning process.

Step 7: If any errors are found, the system will instruct the user to re-boot the computer.

This is a solid way to ensure that the drivers are not running any corrupt files that might be eating away the system’s RAM.

Solution 9 — Remove Recently Installed Softwares

Removing softwares that were recently added will free up memory space and will allow the system to run more smoothly.

This solution should be applied if there has been noticeable deterioration of the system’s memory and the computer becomes slower than usual. Follow the steps to uninstall those applications.

Step 1: Go to Settings from the Start menu.

Step 2: Click on the “Apps” tab.

Step 3: Search the list for specific application names.

Step 4: Click on the application icon and click on “Uninstall”

Step 5: Follow the steps given by the un-installation wizard to complete the process.

Step 6: Restart the system.

This will clear up memory and prevent errors such as the SSD MEMORY MANAGEMENT ERROR.

Solution 10 — Check For Programs Causing Memory Leaks

Memory Leak is the term used for programs that cannot or does not release memory even after being closed by the user. It is a result of incorrect memory allocation by the application.

This slows down the system by consuming RAM space. To ensure that the system is not suffering from memory leaks, follow these steps.

Step 1: Right-click on the Taskbar and open “Task Manager”.

Step 2: Check the applications or processes running under the ‘Processes’ tab.

Step 3: Determine if the applications are correctly using the memory or not.

Step 4: In case of suspicious apps, click on the icon and select “End” to end the process.

Solution 11 —Manually Increase Virtual Memory

Virtual memory is a memory management technique that acts as the main storage although the data is stored inside a secondary storage device. Data transfer is required due to the fact that the secondary device acts as the main storage space for the system.

To manually increase this virtual memory, follow the steps given.

Step 1: Go to Settings from the Start menu.

Step 2: Click on System and then click on About.

Step 3: Below the ‘Related settings’ tab, click on “System Info”.

Step 4: Click on “Advanced System Settings” from the left panel.

Step 5: Under the Advanced tab select “Settings” on the Performance

Step 6: Click on the Advanced tab again.

Step 7: On the ‘Virtual Memory’ tab, click on the “Change” button.

Step 8: Clear the checkbox beside the ‘Automatically manage paging files size for all drives’.

Step 9: Select the Custom size option and then specify the initial and maximum size for the paging files in megabytes.

Click on Set and then OK twice.

Restart the system.

This method is used to increase virtual memory to increase RAM efficiency.

Solution 12 — Run System Restore to Fix SSD Memory Management Error

System Restore is a feature of Microsoft Windows that allows the system to revert to the state it was in when backed-up. This fixes system malfunctions as well as repairs corrupt system data files. It’s very useful to fix the SSD MEMORY MANAGEMENT ERROR if nothing else works.

Follow the steps given below to accomplish this task successfully.

Using CMD 

Step 1: Go to the Start menu and search for “cmd”.

Step 2: Run it as an administrator.

Step 3: Type in “exe” and hit the Enter button.

Step 4: The System Restore wizard will pop-up. Follow the instructions to complete the process.

Using Advanced System Recovery

Step 1: Search for “Create a restore point” from the Start menu.

Step 2: Then click on “System Restore” option.

Step 3: Click on the next button and select the restore point to be used.

Step 4: Click on “Scan for affected programs”.

Step 5: Click on Close > Next > Finish.

Step 6: After completion the computer will revert to the previous state.

Note: Create a System Restore point prior hand.


All the solutions provided in this article have been tested for guaranteed efficiency. The SSD MEMORY MANAGEMENT ERROR is a nightmare to ill-informed users. Reading this article makes it relatively easy to deal with this problem.


Please enter your comment!
Please enter your name here