Fix System Thread Exception Not Handled Error

0
31
How To
HOW TO

The System Thread Exception Not Handled error is another typical problem that customers are encountering these days. You can’t log into Windows because of the error. Typically, the System Thread Exception Not Handled problem happens while your computer system is booting up.

How To
HOW TO

System Thread Exception Not Handled Error

The System Thread Exception Not Handled problem can be caused by a number of factors. Incompatible drivers are the most common cause. Don’t be concerned! Here are four easy solutions for quickly resolving the inconvenient System Thread Exception Not Handled problem.

Method 1: Renaming the Dilemmatic Driver to Fix System Thread Exception Not Handled Error

To rename the driver, follow the steps below:

Step 1 – First and foremost, insert the Windows Recovery Drive or System Repair Disk into your machine.

Step 2 – Select your preferred language and then click Next.

Step 3 – In the bottom left pane, go to Repair.

Step 4 – Select the Troubleshoot option and then ‘Advanced Option’.

Step 5 – Now, go to the Command Prompt menu and enter in the commands one by one:

C:cd\windows\system32\drivers

FILENAME.OLD FILENAME.sys ren FILENAME.sys

Step 6 – Finally, type Exit to exit the command prompt and close it.

Step 7 – Last but not least, restart your computer.

Repeat your search for the Thread Exception Not Handled problem. If the issue persists, move on to the next step.

Method 2: Remove the Error-Producing Driver

It’s possible that faulty drivers are to blame for the issue. In this instance, removing such a driver is the most obvious answer.

To uninstall the problematic driver, follow the steps below:

Step 1 – First and foremost, insert the Windows Recovery Drive or System Repair Disk into your machine.

Step 2 – Select your preferred language and then click Next.

Step 3 – In the bottom left pane, go to Repair.

Step 4 – Select Troubleshoot from the drop-down menu, then Advanced.

Step 5 – Now, choose Command Prompt and type the following command, pressing Enter: legacy bcdedit /set default bootmenupolicy

Step 6 – Finally, type Exit to exit the command prompt and close it.

Step 7 – Last but not least, restart your computer.

Step 8 – To access the Advanced Boot Option page, keep pressing the F8 key.

Step 9 – Finally, choose Safe Mode.

Step 10 – To enter the execute command dialogue box, press the Windows Key and R at the same time.

Step 11 –┬áIn the Run command dialogue box, type devmgmt.msc.

Step 12 – The device managers will appear on the screen. Remove the problematic drivers from the device managers.

Step 13 – To uninstall a driver, right-click on it and pick uninstall from the menu. Then, to confirm Uninstallation, click OK.

Step 14 – After that, go back to the official websites and reinstall the updated drivers.

Step 15 – Last but not least, restart your computer.

Repeat your search for the System Thread Exception Not Handled problem. If the issue persists, move on to the next step.

Method 3: Restoring Your Computer

To restore your computer system to a previous state, follow the steps below:

Step 1 – First and foremost, insert the Windows Recovery Drive or System Repair Disk into your machine.

Step 2 – Select your preferred language and then click Next.

Step 3 – In the bottom left pane, go to Repair.

Step 4 – Select Troubleshoot from the drop-down menu, then Advanced.

Step 5 – To restore your computer system, click System Restore and follow the onscreen instructions.

Step 6 – To complete the process, restart your computer system.

Repeat your search for the System Thread Exception Not Handled problem. If the problem remains, move on to the next step.

Method 4: Experiment with Hardware Acceleration

It is a last-resort solution. If none of the solutions above were successful in resolving the System Thread Exception Not Handled problem, consider using hardware acceleration only when absolutely necessary.

Step 1 – Open a new tab in Google Chrome.

Step 2 – Now, from the menu icon, select Settings. Then, at the bottom, select Show Advanced Settings.

Step 3 – Uncheck the box next to the option to Use Hardware Acceleration When Required.

Step 4 – To make the modifications take effect, restart your computer system.

Conclusion

Hopefully, one of the four solutions listed above was successful in resolving the System Thread Exception Not Handled problem. It’s yet another annoyance that detracts from the user experience. Such complex faults, on the other hand, can be solved with a little patience and hard work.

LEAVE A REPLY

Please enter your comment!
Please enter your name here