Home Blog Page 4

Windows Update Error 0x800705b4


Many issues occur throughout the Windows updating procedure. The ‘Windows update error code 0x800705b4’ is one of these errors. When attempting to upgrade older Windows versions to newer versions, the 0x800705b4 error will appear. The 0x800705b4 problem is annoying since it causes the download to pause and prohibits any further updates.

The Windows Defender System’s operation is the most common cause of the ‘Windows Error Code 0x800705b4’ problem. The Windows defender system sometimes prevents the download from starting. This is due to the fact that the obsolete Defender Systems are unable to handle the update.

How To

Other than the Windows Defender system, the ‘Windows update error code 0x800705b4’ issue might be caused by obsolete or corrupted system components, configurations, and third-party software.

How to Fix Error 0x800705b4 in Windows Update

Don’t be concerned! Here are seven fast fixes for the ‘Windows update error code 0x800705b4’ problem that you should try.

1. Troubleshooter

Troubleshooting can assist you in resolving update issues. So, give it a shot and run the troubleshooter by following the steps below-

Step 1- To begin, look for troubleshoot in the’start’ option and execute it.

Step 2- A troubleshooting window will appear on the screen. Select ‘Windows update’ from the list of alternatives.

Step 3- Select ‘advanced’ from the drop-down menu.

Step 4- After that, click next and select ‘run as administrator.’

Step 5- When difficulties with the update emerge, simply follow the on-screen directions to resolve the issue.

Restart your computer and update your Windows. If the ‘Windows update error code 0x800705b4’ problem reappears, proceed to the next step.

2. Launch Windows Defender

To activate Windows Defender, follow the instructions below-

Step 1- To enter the run command dialogue box, press the ‘Windows’ key and ‘R’ at the same time.

Step 2- Then, in the run command dialogue box, type’services.msc’ and hit Enter.

Step 3- In the services panel, go to the ‘Windows Defender’ option.

Step 4- Verify that the status column is set to ‘Started/Running.’ If the column remains blank, right-click on the ‘Windows defender’ option and choose’start.’

Step 5- Return to the services option if the notification “Windows Defender requires being force-started” appears. then select ‘automatic’ as the startup type.

Step 6- Right-click on the startup type and select properties. Then, from the drop-down menu, choose ‘automatic.’

Step 7- Shut down and restart your computer.

Re-check for the error. If the problem persists, move on to the next step.

 3. Using the Property “Background Intelligent Transfer Service”

To use the background intelligent transfer service, follow the steps below-

Step 1- To launch the run command dialogue box, first press the ‘Windows’ key and ‘R’ together.

Step 2- In the run command dialogue box, type’services.msc’ and hit Enter.

Step 3- In the services box, select the ‘Background Intelligent Transfer Service’ option.

Step 4- Select’stop’ from the ‘Background Intelligent Transfer Service’ option by right-clicking on it.

Step 5- Next, right-click on the ‘Windows Update’ option.

Step 6- From the drop-down menu, select’stop.’

Step 7- Finally, search for ‘Software Distribution’ under the ‘This PC’ option.

Step 8- Next, empty or remove all of the files in the’software distribution’ folder, then restart your computer.

Attempt to update your system once again. If the issue persists, move on to the next step.

 4. Changing the Windows Update Panel’s Settings

To alter the settings for the Windows update panel, follow the instructions below-

Step 1- First and foremost, launch the Windows Update Panel. To access it, type ‘Check for updates’ into the search box or go to the ‘Settings’ menu and select the ‘update and security’ option from the drop-down menu.

Step 2- Select ‘Advanced options’ from the ‘Windows Update’ screen that appears.

Step 3- Uncheck the option that says “Give me updates for other Microsoft programmes when I upgrade Windows.”

Step 4- Shut down and restart your computer.

Step 5- Return to the ‘Windows Update’ page.

Step 6- Finally, select ‘Check for updates.’

Step 7- Once you’ve received the notification “Your device is up to date,” go back to the Options menu and select “Give me updates for other Microsoft products when I upgrade Windows.”

If you’re still having trouble updating Windows, try the next option.

5. Disabling Third-Party Software 

To disable third-party software installed on your computer, follow the instructions below-

Step 1- Identify any third-party antivirus software or firewalls that may be installed on your computer.

Step 2- Then, disable these antivirus software and firewalls.

Step 3- Finally, activate the built-in Windows firewall.

If you like, you can enable the third-party firewalls and antivirus afterwards. However, it is not recommended that such software be installed. This is because third-party software is untrustworthy and may attempt to change your system settings, resulting in issues such as the ‘Windows update error 0x800705b4’.

You can, however, always use the built-in Windows firewall or a legitimate antivirus. Check to see if the issue appears once more. If the problem persists, move on to the next step.

6. Using the Media Creation Tool

You may easily download the update using the’media creation tool.’ This is due to the fact that the media production tool works on the premise of creating distinct ISOs for updating. It also ensures that the original files are preserved.

7. Using a Different Strategy

You can try resetting your computer and reinstalling the update. It could be able to assist you in overcoming the error. To resolve the ‘Windows update error 0x800705b4’ issue, you can also try updating your drivers.

To update your drivers, follow the procedures below-

Step 1- To begin, press and hold the ‘Windows’ and ‘X’ keys at the same time. Now, from the list of options in the bottom left corner, select device management.

Step 2- Next, select the out-of-date driver. Select ‘upgrade the driver software’ from the context menu by right-clicking on it.

Step 3- A new driver will be installed if one is required.


Hopefully, one of the seven ways listed above was successful in resolving your ‘Windows update error 0x800705b4’ problem. Finally, you’ll be able to upgrade your Windows to a newer version and take advantage of a variety of new features as well as a speedier user experience.

Discord JavaScript Error


When Discord is launched on the machine, the error “A JavaScript Error occurred in the main process” occurs. Users do not interpret the error message, which specifies or contains information about the error.

How To

Discord JavaScript Error How to Resolve

The majority of the methods for resolving the Discord JavaScript Error are listed below, along with the instructions for each.

 1. Add Discord Installation Files to Antivirus Software’s Whitelist

Antivirus programmes frequently target Discord installation files, ultimately stopping the installation process. It gets alerted with the fatal JavaScript Error notice at this moment. The “Discord voice” recovery file is a frequent file that is targeted by antiviral software.

As a result, there is a simple technique for resolving the issue, which involves a basic antivirus bypass. To do so, go to the quarantine vault within the antivirus software you’re using. The steps are as follows:

Step 1 – To begin, double-click on the Avast icon or right-click on the Avast tab in the Windows Applications section to launch it.

Step 2 – Next, go to the “Protection” tab. Inside, there are a number of sub-options. Locate the virus chest and open the tab.

Step 3 – The virus chest now contains the files that the antivirus software considers to be insecure. Those files have been quarantined by Avast, and the system has been recovered.

Step 4 – Next, look for files that are linked to Discord; files that are linked to Discord will contain Discord in the name.

Step 5 – After locating the files, click on the three points that appear and linger over them. Choose “Restore and add an exception” from the drop-down menu that displays.

Step 6 – Repeat this process for any Discord-related files. Then resume the installation procedure after you’ve finished it.

After that, add a folder in Avast and specify that Discord installation files are not hazardous to the system to ensure that this mistake, the antivirus, does not occur again.

Follow the steps below to get started:

Step 1 – To begin, open the Avast user interface as described above.

Step 2 – Then, among the different options in the upper right corner, select “Menu.” After that, choose “Settings” from the drop-down menu.

Step 3 – After you’ve finished configuring, click the “General” button on the left side. In the General section, go to the “exceptions” tab.

Step 4 – Now you can create an exception folder that instructs the antivirus to let the system access and use certain files.

Step 5 – Next, choose the “Add exception” option and navigate to the Discord folder and installation files. After that, click “Add exception” and restart Discord.

 2. Delete Discord Files in %localappdata% And %AppData%

Discord typically saves temporary data on the operating system, which aids in regular operations or in a variety of situations. To give Discord clear execution, these files should be destroyed while the programme is running, without causing a JavaScript Error or any other issues.

After the files are erased, though, the Discord settings are reset. It also fixes the JavaScript problem that prevents Discord from loading. The steps to delete the files are as follows:

Step 1 – Go to C:UsersYOURUSERNAMEAppData on your computer.After opening Windows Explorer and selecting this PC, Discord will appear. Then turn on the feature that allows you to see hidden files and folders.

Step 2 – Now, under the file explorer menu, select the View tab option. Then, under the show/hidden section, click the Hidden items option checkbox.

Step 3 – The hidden files will be visible in File Explorer; so, this choice should be remembered until it is changed again. Delete the Discord folder from the AppData folder.

Step 4 – After receiving a notification stating that some files could not be erased because they were in use, try to end the process in the taskbar.

Step 5 – Next, select the Start or Search option from the drop-down menu. Then type Run or press the Window + R key combination to bring up the dialogue box.

Step 6 – Next, locate the Discord folder in the newly opened folder and right-click on it, then select the Delete option.

Step 7 – Finally, double-check that the folders have been completely erased and that no files have been left unchecked. Also, check to see whether the problem has been resolved.

 3. Uninstall Discord and Reinstall It

The most significant method is re-installation, which has proven to be effective for a number of other people who have encountered this issue. Here are the steps to take to accomplish this:

Step 1 – Make sure you’re logged in as an administrator account because the apps can’t be removed from any other account. Then, from the start menu, select Control Panel.

Step 2 – In the Control Panel, select View as a category in the upper right corner. Then, in the Software section, select the Uninstall programme option.

Step 3 – Then, while using the settings, click on Application. Open the application and a list of the programmes that are now running in your operating system will appear. After you’ve found Discord in the Control Panel or Settings, click uninstall.

Step 4 – The Discord Uninstall wizard will then appear, prompting you to select “fully uninstall Discord from the system.” Yes is the answer.

Step 5 – When the process is finished, click the Finish button. After uninstalling it, download the current version from the website and reinstall it.


So these were the answers to the Discord JavaScript Error, and they should serve as a saviour and save the file and folder from the error if you encounter it.

9 Best Video Editing Software – Free and Paid in 2022


Video editing is the technique of manipulating a large number of video pictures. You can utilise video editing software in a variety of sectors, such as film and movie production, or you can use free or paid video editing software to edit your YouTube videos.

You can do a lot with a video editing programme. You can combine numerous video clips, add background music, and apply special effects, among other things.

Best Video Editing Software – Free and Paid in 2022

So you’re probably thinking why you should learn video editing. Allow me to state unequivocally that videos are the most effective marketing and promotional tool ever! We’ll inform you about the 9 finest Video Editing Software in 2020 in this article.

1. Blender

You will not be sorry if you download Blender right now. It’s a fantastic video editing programme. The fact that it is free and open-source software is a huge advantage.

Blender’s most amazing characteristic is that it includes so many options or features that are only found in pricey video editors like 3Dmax. The element that irritates me is that some orders are difficult to comprehend.


  • This is a live preview.
  • Luma Webform is a webform created by Luma.
  • Vectorscope in chroma.
  • Histograms are visual representations of data.
  • Mixing of audio.
  • Scrubbing.
  • Visualization of Waveforms.
  • There are up to 32 video slots available.
  • It’s compatible with Mac, Linux, and Windows.
  • Blender courses and challenges can be enrolled in to help you improve your Blender editing skills.

2. Lighting Effects

For newbies, Lightwork is the greatest video editing software. It’s free (a pro edition is also available), simple to use, and comes with a lot of features.

For YouTube creators, it provides a fantastic feature. You can upload your Lightworks content directly to the YouTube website. Another useful feature is that Lightworks saves your current project automatically.

The user interface is quite monotonous and sophisticated, which is one of the disadvantages. In addition, the free edition lacks functionality and customizations. To use it professionally, you must purchase the full version.


  • It’s simple to use.
  • Directly upload videos to YouTube or Vimeo.
  • Trimming and modifying the timeline.
  • Audio and video content that isn’t subject to royalties.
  • Precision and histogram tool on a 32-bit GPU.
  • It’s compatible with Windows, Linux, and Mac.

3. Use a Shotcut

First and foremost, it is free and open-source software. If you’re a beginner, this is the route to take. It’s also a powerful video editor with a lot of options. Because it is open-source software, you can utilise all of its capabilities for free.

Another plus is that it works flawlessly on low-end PCs. The text feature in Shotcut is really nice. It comes with a plethora of dynamic and static text options that you may freely incorporate into your videos.


  • It’s open-source and simple to use.
  • It does not necessitate the use of high-end hardware.
  • All of the essential functionalities are available.
  • It’s available for Windows, Mac OS X, and Linux.
  • 4K resolution is supported.
  • Timeline with multiple formats.
  • External supervision is required.

4. DaVinci Resolve (DaVinci Resolve)

Let’s move on to DaVinci Resolve, which is one of the greatest video editing programmes available. It is compatible with Mac. This software’s colour correcting capability is really beneficial. However, because DaVinci Resolve requires a high-end system, it consumes a lot of system memory.

With this programme, you may make VFX and motion graphics. Basic editing features also operate flawlessly in DaVinci. It’s a really solid piece of software, and if you want to go into professional video editing, Davinci Resolve is the way to go.


  • It includes everything commercial, film, and television editors need to cut commercials, films, and shows.
  • The DaVinci neural engine gives you the tools you need to solve difficult, time-consuming issues.
  • Multi-user collaboration.
  • Immersive audio in 3D.
  • Support for 10Bit H.264.
  • Noise reduction that is cutting-edge.
  • Grading in HDR.
  • Windows, Mac OS X, and Linux are all supported.

5. Take a Shot

Openshot is a free and open-source programme. It had received numerous accolades for its performance. It’s available for Mac, Windows, and Linux. The intriguing aspect is that it has a very simple user interface and does not necessitate high-end hardware.

Openshot provides a number of effects that improve the aesthetics of our project. We can alter the time frame of media after dragging and dropping it to layers. The bothersome thing is that exporting a video takes longer and occasionally crashes.


  • The strong FFmpeg library is used. As a result, it supports a wide range of video, picture, and audio formats.
  • Keyframe animation framework with a lot of power.
  • Support for drag-and-drop.
  • There are no restrictions on the number of levels.
  • Real-time preview of video transitions.
  • Animation titles in 3D.
  • A chronology that is more advanced.

6. Avidemux 

Avidemux is a free video editor that is ideal for beginners. It’s easy to use and can perform basic editing activities including chopping, filtering, and encoding.

However, take in mind that Avidemux lacks a timeline or transition feature. Avidemux is the finest option for simple editing. If you are a professional, though, you can skip this step.


  • Encoding.
  • Filtering.
  • Filters for audio.
  • Reduce the size of a video by compressing it.
  • Video deinterlacing.

7. VSDC (Visual Software Development Corporation) 

A VSDC video editor is available in both free and paid versions. The free version includes the entire VSDC editing suite. You can generate content in Full HD resolution with 30 frames per second in VSDC.

You can use it to add various effects and audio. The most crucial thing to remember is that the free version will also receive regular updates.


  • Green screen effects with chroma key functionality.
  • Templates for 3D diagrams.
  • Tools for colour correction.
  • 4K support for HEVC/H.265 for preserving the greatest quality at the smallest file size.
  • Masking DVD burning tool built-in.

8. Movie Maker 10

For beginners, Movie Maker 10 is a free video editing programme. You are free to do whatever you want here. You can use background music, transition effects, and image filters to draw attention to your films.

There are two versions of the software: free and pro. The pro edition, of course, adds some extra capabilities, such as the ability to output Full HD video and endless photo overlay options.


  • Trimming video.
  • Including music in the backdrop.
  • Transition effects in the text caption.
  • Zoom effects with pan-tilt.

9. HitFilm Express 

HitFilm Express is a video editing programme that is absolutely free. It’s available for both Windows and Mac. It contains a robust VFX tool and is ideal for novices.

However, to utilise HitFilm Express programme successfully, you’ll need a high-end computer. You can use this software to edit or generate slow-motion videos.


  • Exceptional user interface.
  • Beginners will enjoy it.
  • Grading and colour correction.
  • Importing a 3D model.
  • Presets can be exported.
  • There are no limits to the number of layers and transitions you can use.
  • Auto-stabilization.
  • The toolset of a compositor (text & titling, lens flares, puppet tools).


In today’s market, video editing is in high demand. Software is available for everyone, whether you’re a newbie or a seasoned veteran. This post will show you the top nine video editing programmes available on the internet. Download what you need from the list and keep studying.

Android Data Recovery Software – Tested & Trusted


Android Data Recovery Software

It is quite simple to recover lost data on Android; simply look through the programmes listed below to restore erased data.

1. Data Retrieval

In Windows and Mac OS, the 7-Data Recovery software aids in the recovery of data lost from an Android or SD card. To put it another way, this software aids in the retrieval of deleted files from mobile devices.


This software is available for free download, but it can only recover 1 GB of data. As a result, the pro edition of this software is available for $49.95. Follow the steps below one by one to recover deleted photographs, movies, music, contacts, and other files:

Step 1: First, download and install the software from this link: 7-Data Recovery on your computer.

Step 2: Using a USB cable, connect your mobile device to the USB port.

Step 3: Select the connected device from the menu and click the “Recover” button.

Step 4: Sit back and wait for the scanning to finish.

Step 5: When the scanning is finished, tick the boxes next to the deleted files you want to restore.

Step 6: Finally, decide where you want the recovered data to be saved.

Step 7: Sit back and wait for the procedure to complete.

The benefit of recovering with this programme is that you don’t require root access to the device’s file system. The disadvantage is that this software requires a system to recover deleted files; without a system, it is difficult to utilise this software.

7-Data Recovery programme is now known as Disk Drill. The software capabilities have not changed.

2. Dr. Fone 

Dr. Fone is an easy-to-use Android data recovery programme that lets you recover deleted information like video, chat logs, contacts, text messages, and other data from your Android phone.

It also supports practically all forms of photo, music, video, and document extensions. This software can help you recover data from both your internal memory and your SD card.

The Dr. Fone app has a free version that allows you to:

  • Files that have been damaged or deleted can be restored.
  • Data transfer between mobile devices and computers.

From the link, get the Dr. Fone programme.

To use this software, follow the steps below:

Step 1: Connect your phone to your computer using the USB cable. Enable USB debugging on your phone as well.

Step 2: After that, you must select a scanning method. The user must choose between two modes: Standard and Advanced.

Step 3: Now it’s time to start scanning.

Step 4: The files will be presented in their entirety. Now, check to see whether any of the files you want to recover have been marked.

Step 5: Finally, save the files to wherever you choose.

The scanning feature of this software is incredibly speedy, and it aids in the recovery of practically all deleted files.

3. Undeleter

Undeleter is one of the best Android apps for recovering deleted files. It can restore almost all major formats for free, but you must pay to use some of the features.

  • You may get it from the Play Store by following the link.
  • The Internal Memory, SD card, and Application directories are all scanned by this software.
  • On Android, you can only access the root directory after enabling root on your device.
  • Undeleter will only look for cached photos or thumbnails if you don’t specify otherwise.
  • It may be used to recover APK files, text files, Whatsapp conversations, and documents.
  • You can save the retrieved data to a cloud storage service like Google Drive.
  • You may also get the full version, which costs roughly $5 and is ad-free.

Although it has a low rating on the Play Store, it is one of the greatest data recovery apps.

4. Android Minitool Mobile Recovery

In only a few minutes, the Minitool Mobile Recovery programme can help you recover deleted data from your Android’s internal memory or SD card. This application is completely free.

There are two recovery options in this programme: one for memory cards and the other for device memory. This application can be downloaded by following the link.

Examining the contents of your phone’s storage or SD card

Step 1: If you don’t have a card reader, start by selecting Recover from Phone. Otherwise, select Recover from SD card.

Step 2: Next, connect your device to your computer using a USB cord. After that, the MiniTool software will have access to your device’s filesystem. Enable USB debugging on your device as well. If “Recover from SD card” is chosen, connect the SD card to the computer using a card reader.

Step 3: You must now sign up when you connect your device to the PC for the first time.

Step 4: Your device should also be rooted to allow for better scanning.

Step 5: Finally, press the Next button. You must choose between two scan modes when scanning:

Deep Scan Quick Scan

Step 6: Once you’ve selected the Scan option, click “Next” to begin scanning your phone. Then sit back and wait for the scanning to complete.

Step 7: When the scanning is finished, a list of all files identified will appear. After that, select the files you want to recover.

5. DiskDigger for Android 

DiskDigger for Android lets you recover deleted photographs and videos from your phone’s internal or external storage. You can save the restored data to your device or to the internet.

This application can be used without a computer. It accepts all image formats, including png, jpg, and bmp. There is also no need for root access to the file system, however having root access increases the chances of finding deleted files.

There are two sorts of scan modes: basic scan mode and complete scan mode.

  • Without root access, you may recover deleted files on Android using Basic Scan.
  • You can recover deleted files on Android with Full Scan if you have root access.

When the scanning is finished, you’ll be able to see all of the files and check the box next to the file you want to recover. Then select “Recover” from the drop-down menu.

By clicking on the link, you can get DiskDigger for Android from the Google Play Store.

6. EaseUS Mobisaver for Android 

EaseUS Mobisaver can help you recover deleted files from your Android device. To recover the data, start by running the EaseUS Mobisaver application on your computer. Also, connect your gadget to the PC via USB cable, and then begin scanning. The recovered files can be saved to your computer.

  • EaseUS Mobisaver App Features: A free Android version of EaseUS Mobisaver is available.
  • Scans the data in a secure manner and saves it to the specified destination.
  • It also scans the phone memory in part, in addition to the SD card.
  • Assist with data recovery, including photographs, videos, documents, and contacts.
  • Save the retrieved information in an easy-to-read format. The contacts file, for example, will be saved in either CSV or HTML format.
    From the URL, you can download the programme.

Fix System Thread Exception Not Handled Error


The System Thread Exception Not Handled error is another typical problem that customers are encountering these days. You can’t log into Windows because of the error. Typically, the System Thread Exception Not Handled problem happens while your computer system is booting up.

How To

System Thread Exception Not Handled Error

The System Thread Exception Not Handled problem can be caused by a number of factors. Incompatible drivers are the most common cause. Don’t be concerned! Here are four easy solutions for quickly resolving the inconvenient System Thread Exception Not Handled problem.

Method 1: Renaming the Dilemmatic Driver to Fix System Thread Exception Not Handled Error

To rename the driver, follow the steps below:

Step 1 – First and foremost, insert the Windows Recovery Drive or System Repair Disk into your machine.

Step 2 – Select your preferred language and then click Next.

Step 3 – In the bottom left pane, go to Repair.

Step 4 – Select the Troubleshoot option and then ‘Advanced Option’.

Step 5 – Now, go to the Command Prompt menu and enter in the commands one by one:



Step 6 – Finally, type Exit to exit the command prompt and close it.

Step 7 – Last but not least, restart your computer.

Repeat your search for the Thread Exception Not Handled problem. If the issue persists, move on to the next step.

Method 2: Remove the Error-Producing Driver

It’s possible that faulty drivers are to blame for the issue. In this instance, removing such a driver is the most obvious answer.

To uninstall the problematic driver, follow the steps below:

Step 1 – First and foremost, insert the Windows Recovery Drive or System Repair Disk into your machine.

Step 2 – Select your preferred language and then click Next.

Step 3 – In the bottom left pane, go to Repair.

Step 4 – Select Troubleshoot from the drop-down menu, then Advanced.

Step 5 – Now, choose Command Prompt and type the following command, pressing Enter: legacy bcdedit /set default bootmenupolicy

Step 6 – Finally, type Exit to exit the command prompt and close it.

Step 7 – Last but not least, restart your computer.

Step 8 – To access the Advanced Boot Option page, keep pressing the F8 key.

Step 9 – Finally, choose Safe Mode.

Step 10 – To enter the execute command dialogue box, press the Windows Key and R at the same time.

Step 11 – In the Run command dialogue box, type devmgmt.msc.

Step 12 – The device managers will appear on the screen. Remove the problematic drivers from the device managers.

Step 13 – To uninstall a driver, right-click on it and pick uninstall from the menu. Then, to confirm Uninstallation, click OK.

Step 14 – After that, go back to the official websites and reinstall the updated drivers.

Step 15 – Last but not least, restart your computer.

Repeat your search for the System Thread Exception Not Handled problem. If the issue persists, move on to the next step.

Method 3: Restoring Your Computer

To restore your computer system to a previous state, follow the steps below:

Step 1 – First and foremost, insert the Windows Recovery Drive or System Repair Disk into your machine.

Step 2 – Select your preferred language and then click Next.

Step 3 – In the bottom left pane, go to Repair.

Step 4 – Select Troubleshoot from the drop-down menu, then Advanced.

Step 5 – To restore your computer system, click System Restore and follow the onscreen instructions.

Step 6 – To complete the process, restart your computer system.

Repeat your search for the System Thread Exception Not Handled problem. If the problem remains, move on to the next step.

Method 4: Experiment with Hardware Acceleration

It is a last-resort solution. If none of the solutions above were successful in resolving the System Thread Exception Not Handled problem, consider using hardware acceleration only when absolutely necessary.

Step 1 – Open a new tab in Google Chrome.

Step 2 – Now, from the menu icon, select Settings. Then, at the bottom, select Show Advanced Settings.

Step 3 – Uncheck the box next to the option to Use Hardware Acceleration When Required.

Step 4 – To make the modifications take effect, restart your computer system.


Hopefully, one of the four solutions listed above was successful in resolving the System Thread Exception Not Handled problem. It’s yet another annoyance that detracts from the user experience. Such complex faults, on the other hand, can be solved with a little patience and hard work.



Are you annoyed by the ERR_CONNECTION_TIMED_OUT error that keeps cropping up in Chrome? Don’t be concerned! Here’s how to fix the ERR_CONNECTION_TIMED_OUT problem. The ERR_CONNECTION_TIMED_OUT error is a typical occurrence in Google Chrome on Windows 10 PCs.

The bigger the problem, the more important it is to address it. So, have a look at these three simple fixes for the ERR_CONNECTION_TIMED_OUT problem as soon as possible.

How To
How To

In Google Chrome, How Do You Fix ERR_CONNECTION_TIMED_OUT

Method 1: In Windows, Hosts File

The ERR_CONNECTION_TIMED_OUT problem can be fixed by making a few changes to the hosts file, which contains the IP and protocols for the TCP/IP models.

To change these host files, follow the steps below:

Step 1 – Open the Windows search menu and look for Notepad.

Step 2 – Next, right-click on the Notepad option and select Run as Administrator from the context menu.

Step 3 – The notepad will be displayed. Now select File from the drop-down menu.

Step 4 – Next, go to C:WindowsSystem32driversetc and select Open.

Step 5 – From the viewable list of files, open the host’s file. It will most likely be the first choice displayed.

Step 6 – Attempt to read the file now. At the conclusion of hash-tags, you’ll find a couple of IP addresses and URLs.

Step 7 – After that, select all of those IP addresses and URLs and remove them altogether.

Step 8 – To save the updated host’s file, go to File and then Save.

Step 9 – Last but not least, restart your computer.

Examine the ERR_CONNECTION_TIMED_OUT error once more. If the issue persists, move on to the next step.

Method 2: Renew or Flush Your DNS

The browser may still be utilising an old DNS (Domain Name System) that is no longer valid, resulting in the ERR_CONNECTION_TIMED_OUT error. You’ll need to flush or renew your DNS in this scenario.

To flush your DNS, follow the steps below:

Step 1 – To begin, hold down the Windows key and the X key at the same time.

Step 2 – Next, go to the bottom left corner of your screen and click Command Prompt (Admin).

Step 3 – A command prompt window will appear on the screen. To use the clipboard, make sure that Quick edit mode is turned on.

One by one, type the following commands into the command prompt window: (Remember to hit enter after each command)

netsh winsock reset ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew

Step 4 – Last but not least, restart your computer.

Method 3: Delete the Data in the Browser

For the majority of browser-related issues, clearing the browser’s data is the best solution.

To delete the browser’s data, follow the steps below:

Step 1 – To begin, right-click on your Google Chrome browser and select “Run as administrator.”

Step 2 – Select History from the menu or press Ctrl and H at the same time.

Step 3 – Finally, pick the option to Clear Browsing Data.

Step 4 – Select the Beginning of Time, as well as all of the underlying options, such as Browsing History, Download History, Cookies and Other Site and Plug-in Data, Cached Images and Files, Auto-Fill form Data, and Passwords.

Step 5 – Finally, select Clear Browsing Data and wait for Chrome to complete the process.

Examine the ERR_CONNECTION_TIMED_OUT Error once more.


Hopefully, one of the three techniques above was successful in resolving the ERR_CONNECTION_TIMED_OUT problem. You may now enjoy error-free browsing once more.

[SOLVED] COM Surrogate Has Stopped Working


COM Surrogate Has Stopped Working is one of the most faced problems. This may happen when a printout is being taken out from an internet source and it is not noticed until a crash occurs. The explorer uses this COM Surrogate when the user tries to extract thumbnails. The user gets many types of crashes when browsing through files and folders having media or videos thereafter.

COM Surrogate Has Stopped Working in Windows 7 8 10

While a user browses through files and folders, COM Surrogate is a host process that runs in the background [during the time of browsing]. And because of this program, the user can see file thumbnails and other information. When the crash happens a process “dllhost.exe” gets displayed by the name of the COM Surrogate. And then a message pops – up on the user’s screen saying Com Surrogate has stopped working.

COM Surrogate is a fundamental process in Windows 10. When something goes wrong the Com Surrogate tries to secure the explorer from crashing and taking all of the dependency on itself. Which is the reason why people consider it to be a sacrificial process?

How to Fix COM Surrogate Has Stopped Working Error

There are some solutions below which help users to Fix COM Surrogate Has Stopped Working by themselves.

Note: The users should keep in mind that before applying and solution, they have to make sure that their Windows is updated. Many times certain problems get solved by updating the Windows.

Solution 1: Update Codecs

So many users, Update Codecs have been successful enough to fix the COM Surrogate has stopped working issue. If the user has installed Nero or DivX, then they need to make sure that they have updated them to the latest versions. If updating the versions does not help then the user needs to uninstall and reinstall the application again. If the user has updated the codecs and the issue is still unresolved, then they have to try renaming the files.

Solution 2: Add dllhost.exe to the DEP Exception

The users can follow the steps below to understand and proceed with the solution:

Step 1: The user has to find This PC icon and Right-click on it to select properties.

Step 2: Then the user has to select “Advanced system settings” (which they can find on the left pane of the current window.

Step 3: Then on the next window the user has to select “Performance“, under which they need to click on “Settings“.

Step 4: The user has to click on “Data Execution Prevention” (The user can find it under the Performance tab).

Step 5: The next window will provide the user two options from which has to click on “Turn on DEP for all programs and services except those I select“.

Step 6: And lastly the need to click on “Add“.

Step 7: An Add pop-up box will open up in front of the user’s screen and then they have to choose executable files.

Step 8: Lastly, the user has to select the “dllhost file“.

Step 9: The user then has to click on “Open“.

Solution 3: Reregister the DLLs

The users can follow the steps below to understand and proceed with the solution:

Step 1: The user has to Right-click on the Windows icon to select “Command Prompt“.

Step 2: The user has to type the following command when the application opens.

regsvr32 vbscript.dll
regsvr32 jscript.dll

Step 3: After that, the user has to press Enter and restart the system and check whether the COM Surrogate has stopped working problem is solved or not.

Solution 4: Rollback Display your Adapter Driver

The users can follow the steps below to understand and proceed with the solution:

Step 1: The user has to open “Quick Access Menu” (they can also use the shortcut Window key + X key).

Step 2: Then the user has to select Drive Manager from the follow-up window.

Step 3: After that, the user has to find “Display Adapters” and then after selecting it the user has to expand it.

Step 4: Next, the user has to Right-click on “Display Adapter Driver” from the list. After that, they need to select the “Properties” of the same.

Step 5: Once the properties window opens, the user has to select “Driver” and finally click on “Roll Back Driver“.

Note: The user might have to check for errors like NVIDIA Driver Crashing in Windows 10 if they have any graphics like NVIDIA or AMD.

Solution 5: Scan Disk Errors

The users can follow the steps below to understand and proceed with the solution:

Step 1: Firstly, the user has to select This PC.

Step 2: Then the user has to Right-click on the disk drive which they have selected.

Step 3: Then the user has to select “Properties” from the pop-up list.

Step 4: Then the user has to select check now which will be under error checking within properties.

Step 5: Lastly, the user has to select the two options, which will be shown on the user’s screen and then click start.

Solution 6: Reset Internet Explorer

Sometimes, corrupted cached files can cause this issue. In that case, it would be best to reset the Internet explorer

The following steps will help the user to do so:

Step 1: Firstly, the user has to open the run dialog box (they can do so by pressing Windows key and R key).

Step 2: Then in the Run dialog box they need to type inetcpl.cpl and then click OK.

Step 3: Then the user has to navigate to the Advanced tab and then select Reset.

Step 4: Then the user has to check on the option Delete Personal Settings and then select reset again.

Step 5: Lastly, the users have to reboot their devices and check whether the COM Surrogate has stopped working problem persists or not.

Check Out:


Hopefully, one of the methods would have been useful in solving the COM Surrogate has stopped working error.

[SOLVED] Bluetooth Not Available on Mac


Bluetooth is a wireless technology that came up at the end of the millennium. It is regarded as a universal wireless technology for short-range as it operates on a single radio frequency connecting multiple devices at a time. Being compatible with almost all variants of devices, it has been in the market for over two decades. If any of your old computers are not having this feature then you can also purchase it in the form of a USB dongle.

However, with the wide range of possibilities in these days, it’s up to you if you use Bluetooth or not. In this article, we have given a complete description of how to go about with Bluetooth. Also, if you find your Bluetooth is not working  in your Mac or any devices, we have listed pretty simple tips to fix it

Bluetooth Not Available on Mac

How to Turn on Bluetooth on Mac

Bluetooth is a built-in feature that is available on all Mac computers. If you are searching for applications to transfer some files from one device to another, then you can use Bluetooth. Well, if you are not sure how to turn on Bluetooth, just go through the below steps.

Step 1: From the Apple menu, you need to navigate to the System Preferences.

Step 2: In the list of options, click on the Bluetooth option.

Step 3: Now a new window appears and you need to select Turn Bluetooth On.

Step 4: Last but not least, tick the box which contains “Show Bluetooth in the menu bar“. This will create a shortcut in the menu bar to indicate if any devices are connected, or even if any of the connected device’s battery is low.

How to Connect Bluetooth Devices to Mac

From the above discussion, you might have known how to turn on Bluetooth in your Mac device. Since Bluetooth is a wireless connection so to establish a connection between Mac and other devices a process called  ‘pairing ‘ is used. After you pair with a particular device, your PC will automatically get connected to it anytime if its in range.

Now, If you are on the verge of connecting Bluetooth devices to Mac then you must know that the Mac devices are pre-paired and it will automatically get connected when you turn on the Bluetooth option. In case, if you are using an Apple device then you need to know how to pair a device to it. So, here are the steps shown below:

Step 1: Turn the apple device On.

Step 2: From the Apple menu, go to the System Preferences.

Step 3: From the list of applications, click on Bluetooth.

Step 4: In a new window, you need to click on Turn Bluetooth On.

Step 5: Step 4 will pair your Mac with the required device. After the device pairs, click on connect and start sharing your media.

How to Connect Bluetooth Headphones to Mac

Connecting Bluetooth headphones or Bluetooth speakers to Mac is no way different from connecting Bluetooth enabled devices. If you are still confused and not able to connect Bluetooth headphones to Mac, check the below steps.

Step 1: Make sure that you enable the Bluetooth option in your headphone.

Step 2: Open the System Preferences in your Mac device.

Step 3: Click on the Bluetooth application and Turn Bluetooth On.

Step 4: On the bottom right side of the screen, you will see the list of devices. If your Headphones are shown up from the list, click Connect.

How to Fix Magic Mouse not connecting to Mac Bluetooth

If you are unable to connect Magic Mouse to Mac using Bluetooth,  try to wake up the device:

  • Make sure that the Magic Mouse Bluetooth option is On.
  • Try restarting both the devices.
  • Check if the battery of your mouse is working.

Well if still the connection issue still exists, try the  following:

Step 1: Navigate to the System Preferences and check if Bluetooth is On. If not, click Turn On the Bluetooth.

Step 2: Now, with the help of lightning cable, you need to Plugin your Magic mouse.

Step 3: After you plugin the magic mouse, you need to set up the Bluetooth. Then the Mac searches for new devices and gets connected to it.

The above-mentioned steps will definitely help you in connecting to a Magic Mouse but the setup is a bit time taking. So to make it easy, you can download the Toothfairy application which is said to be a Bluetooth assistant app. It helps you to get connected to headphones, AirPods, or any of your Bluetooth devices in just a single click.

How to Wake up Bluetooth Connection?

When you don’t use a particular connection or setup feature for a prolonged time, they get disconnected when you turn it on at once. So, to fix it you just make sure to check the below points before looking into any other troubleshooting problems.

  1. It is maybe that your device battery is low due to which you may be disconnected from using this wireless connection i.e, Bluetooth.
  2. Sometimes users forget to enable the Bluetooth On from the menu bar. So make sure to enable and check your connection.
  3. You need to make sure that the paired devices are within 30 feet. Also, be away from high-frequency gadgets as they interrupt your connection.

If these checklists didn’t help you in connecting to Bluetooth then proceed to the technical solutions which are listed below.

Method 1: Turn Bluetooth off and Back On

Though turning Bluetooth off and back on sounds silly but doing so it sometimes said to fix the problem. You can turn off Bluetooth by clicking the Bluetooth icon from the menu bar. If you have not created any shortcut in the menu bar, go to the System Preferences and select Bluetooth option then Click Turn Bluetooth Off. If this didn’t work, you can also try restarting your Mac as it removes other troubleshooting issues that Mac encounters while running Bluetooth. So, try your luck by doing the above steps.

Method 2: Disconnect all USB Devices

If the above tip didn’t work, try disconnecting all USB devices. Sometimes the USB devices get corrupted due to which you will not be able to connect Bluetooth and other applications. Here, is the procedure for you to disconnect USB devices.

Step 1: You need to go to System Preferences and select the Bluetooth option.

Step 2: Now, click on X beside the device to disconnect it.

Step 3: Close all the applications and restart your Mac.

Step 4: After restarting your Mac, you can reconnect all the devices.

Method 3: Delete the Bluetooth .plist Files

Property List (.plist) is a file that is used by Mac to save preferences of applications. They contain properties and configuration settings for various programs. If your Bluetooth module is not working then it is likely to be affected by .plist file as this file may get corrupted. So, try deleting the .plist file.

Step 1: Close all the applications that are connected via Bluetooth.

Step 2: Press Command + Shift + G in the Finder menu.

Step 3: Type /Library /Preferences/ and click Go.

Step 4: Now, you need to find the com.apple.Bluetooth.plist file and delete it.

Step 5: Lastly, restart your Mac and try connecting to Bluetooth.

Method 4: Reset the Bluetooth Module

Bluetooth is a wireless connection that works on all types of devices. Usually, you do not get any errors with the Bluetooth module but there are certain times when issues occur and become difficult to troubleshoot. Rather than giving up, another solution to fix the issue is to reset the Bluetooth module using the debug menu option.

Step 1: You need to hold down the Shift + Option key and click on the Bluetooth option in the menu bar.

Step 2: Then, click on Debug and select “Remove All Devices”.

Step 3: Click on Debug again and select “Reset the Bluetooth module”.

Step 4: After completion of resetting the Bluetooth module, you restart your Mac and check for the issue.

Method 5: Optimize and Remove Your System Junk

It is sometimes possible that you have downloaded some unknown software or application which is being interrupted with Bluetooth module. So, once you try to scan your system and remove all the system junk including the recently downloaded files. The easiest way to remove such files is to use CleanMyMac X. Here, are the steps how the above application works:

Step 1: After downloading the CleanMyMac X application, launch it.

Step 2: Now, Scan your system. This process takes a bit time so be patient till the process completes.

Step 3: You can review the details, and click on the files which you want to delete.


So, if you have any trouble connecting Bluetooth to Mac, you can fix it from the above-mentioned tips.

The Best Cloud Hosting Services for 2021


Cloud hosting is perhaps one of the most revolutionary technologies we’ve seen in recent years. For those who are unfamiliar with how it works, cloud hosting essentially lets you lease a network of servers to store a site’s files. This is great for many reasons — from its scalability and high uptime, to overall accessibility. Out of all the benefits of cloud servers, one of the biggest though is the fact that is very cost-efficient.

When storing information in the cloud, there is no need for a physical data center. Typically, you only pay for the server and resources you need. Even building your own private cloud server will still consume less power and be more affordable than a traditional server. Thanks to the proper PCB impedance calculations, manufacturers can strike a balance between a circuitry’s crosstalk susceptibility and sheet capacitance — resulting in optimal power delivery. To that end, cloud platforms contain high-performing PCBs with the right impedance as well, so you don’t need to worry about droop.

Best Cloud Hosting Services

The Best Cloud Hosting Services for 2021

There are certainly several hosting providers to choose from — whether you’re looking to host an application or website. So, here are some of the best you can choose from.

1. A2 Hosting

A2 Hosting’s cloud hosting starts from only $4.99 per month, and they currently power 500,000 sites. Their service comes with a free cPanel control panel and SSL certificate. Plus, there’s also the option for free site migration. A2 Hosting promises 99.90% uptime, which means there’s only a maximum of 9 hours of downtime a year. They provide easy Cloudflare setup from the control panel, letting you choose the tier you’d like your load speed to be. If you’re not sure how to start, A2 Hosting’s “Guru Crew” customer service team are excellent and always available to help.

2. Hostgator

Hostgator’s cloud hosting starts at $4.95 a month. It’s a great price point for a hosting service that provides an SSL certificate and unlimited bandwidth. They also boast 99.99% guaranteed uptime, which is impressive given that they power 8 million sites. You get a free domain for the first year, and you also have unlimited email accounts, sub-domains, and FTP accounts. For businesses, HostGator’s basic plan has a free email marketing software that helps you build your audience through newsletters and automated email campaigns.

3. DreamHost

DreamHost Cloud Hosting Service

DreamHost is a great entry-level cloud hosting service, hosting 1.5 million websites. It has a guaranteed 99.95% uptime, and this translates to only four and a half hours of downtime a year. DreamHost’s cloud hosting service is more flexible than other hosting services because you get charged at an hourly rate. The price can go from $0.0075 to $0.16, depending on the amount of bandwidth and RAM you’re using. You get free daily backups and an SSL certificate. Despite being one of the cheaper hosting services, DreamHost doesn’t skimp on quality.

4. Cloudways

Cloudways’ cloud hosting starts at $10 a month, which is higher than other hosting services, but it comes packed with features. If you’d like more flexibility, you can opt for a pay-as-you-go rate of $0.0139 an hour. Cloudways offers one-click cloning, backup and restore, and SSD-based hosting, among other things. You can choose the region and city where you want your cloud servers to be deployed from, so you are never too far from your servers. This is great for improving site speed.

5. Hostinger

Hostinger Cloud Hosting

Hostinger has more than 30 million users. Their cloud hosting starts at $9.99 per month with a 99.9% uptime guarantee. It has multilingual customer support — from chat support to an extensive library of how-to articles. What makes it different as well is that it offers hosting for Linux and Windows. For security, Hostinger offers free SSL certificates and two-factor authentication. Their control panel is unique since it was created in-house, plus it’s also beginner-friendly.

7 Best Xbox 360 Emulator for PC in 2020


Xbox Emulator is a substitute for Xbox game console.It allows you to play Xbox games on windows PC .Since, most of the Xbox 360 emulators are free of cost and they can be downloaded freely from the internet, you can play Xbox 360 games directly on your PC once it is installed.

If you are one of those who enjoy playing games with great audio effects and have a full hd experience and that also in a very cost-effective way, then you are at the right place. Xbox 360 emulator is the one-fit solution to your wide range of gaming needs.

7 Best Xbox 360 Emulator for PC in 2020

So without even bothering to buy Xbox 360 or Xbox one game console, let’s look at the 7 best Xbox emulators that would aid in satiating your hunger to play innumerable exciting games-

Best Xbox 360 Emulator

1. Xenia Emulator

Xenia is considered to be the best Xbox 360 emulator for Windows PC as it is free and provides high quality performance with almost negligible instances of application crashes.

It should be noted however that it is currently available only for Windows(10/8/8.1) supported PCs which are well equipped with vulkan-compatible graphic processing unit, 64-bit x86 processor, Xinput-supported controller, AVX-support.The Linux OS version is still being developed.

Additionally, the installation procedure is very simple ,you just have to download a zip file, extract it and then run the program as system admin.Moreover, you do not  need to download any Xbox 360 system files.

2. CXBX Emulator

If you are looking for an emulator through which you can directly  enjoy Xbox 360 games on your PC without creating a virtual machine to emulate Xbox 360 games ,then CXBX emulator would be the best choice.

Moreover, this emulator is easy to download and install and it comes with a built-in program that allows you to convert Xbox 360 games into .exe files.

Additionally with this type of emulator, you don’t even have to worry about system lags as it is well optimised to get rid of such issues.

However, this emulator has some limitations like it supports only 5 games.

3. DXBX Xbox 360 Emulator

This emulator not only emulates Xbox 360 games perfectly , but also Xbox One games.It is highly compatible and hosts Direct3D8 engine which performs all graphics work.

Additionally , it emulates the core of Xbox games with features such as pixel shaders,controllers,graphics and soundtracks.

Moreover, DXBX emulator is well known to incorporate customizable sophisticated symbol detection systems.

However, the major limitation is that this emulator is suitable for only 32-bit PCs even though it supports Windows 10, 8.1, 8 ,thus making it less worthy for many users.

4. XQEMU Emulator

This cross-platform  emulator not only supports all the major Operating systems like Windows,Linux,macOS but it is also an open source program that is designed for the original Xbox.Additionally, XQEMU Emulator supports around 275 games with a large number of top 25 Xbox games of all time making their way in the list.

However, since this emulator is still under active development so there are frequent cases of buggy graphics and lags .Nevertheless, new features are being constantly added.

5. Xeon Emulator

Xeon emulator is an emulator which is effortlessly easy to use because it gives you an instruction wizard for emulating the game .

However, this emulator is supported by only Windows and DOS operating systems which makes it of limited use adding to which is the fact that it can emulate only one commercial game-the NTSC version of Halo.

6. EX360E Xbox 360 Emulator

Also known as an experimental emulator, EX360E Xbox 360 is one of the best emulators for Windows PC.It not only allows you to play Xbox 360 games but this excellent emulator also facilitates playing Xbox one games.

The overall gaming experience is smooth with the added advantage that executable files are created directly and there is no need to create a separate virtual environment.

Despite all these advantages, the major limitation of this emulator is that the user interface is not much user-friendly and it only supports 64 bit Windows OS with Windows 7 or above installed.

7. VR Xbox 360 PC Emulator

VR Xbox 360 PC Emulator provides an outstanding gaming experience and is one of the most widely used Xbox emulator.In addition to high frame rate per second,it provides improved memory consumption, Radeon GPU support and fast loading time.

Moreover, this emulator is compatible with Windows 64 bit as well as Windows 32 bit system and for Windows 2000/XP/7.


Clearly, if you are looking for the best software that enhances your gaming experience and allows you to play the Xbox console games on the Windows PC then , any of the above Xbox Emulators are perfect choices. In addition to being free and open-source, the above mentioned Xbox emulators augment the overall user gaming experience.